The rich history of the modern electric bass guitar is rooted in the 20th-century "Golden Era" of instrument manufacturing. During this time, guitar and bass manufacturing pioneers produced legendary solid body concepts, crafting some of the world's most beloved Instrument designs. In celebration of these time-honored designs, we bring you the BFR Stingray Retro Seventy-Six.
The All-new Stingray Retro 76' is loaded with many vintage-inspired specifications celebrating Music Man's 70's era of American craftsmanship. This Stingray BFR edition features a beautiful nitro-finished 3-tone Sunburst ash body with vast black, yellow, and red swatches, capturing the look and feel of Music Man's flagship 4-string bass. A faithful reproduction, this retro edition bass reproduces the Stingray's original specifications, including an Alnico-loaded humbucking pickup, 2-band preamp, 21-fret 3-Bolt maple neck with micro-tilt adjustment, and a strings-thru-the-body-bridge with adjustable mute pads. Overall a classic feeling-sounding vintage-inspired instrument that offers the best of old-world craftsmanship with contemporary playability and reliability. The BFR Stingray Retro 76' bass comes with a period correct tolex case, certificate of authenticity and is limited to 100 pieces worldwide.
13-1/2" wide x 1-5/8" thick x 44-7/8" long (34.3 cm wide, 4.1 cm thick, 114.0 cm long)
Body Color
76 burst
Body Finish
Nitrocellulose (See additional notes below)
Body Wood
Ash
Bridge
Pre-EB Geometry Music Man® chrome plated, steel bridge plate with vintage stainless steel saddles
Controls
Custom 2-band active preamp; vol, treble, bass
Fingerboard
Maple
Frets
21 - Low profile, wide, nickel
Fret Markers
5/16" Dot
Neck Attachment
3 Bolt, Pre EB Music Man Design with Micro-Tilt Neck Shim Adjustment
Neck Colors
Slight yellow tint
Neck Finish
Nitrocellulose (See additional notes below)
Neck Radius
7.5" (19.1 cm)
Neck Width
1.686" (4.282 cm) at nut; 2.466" (6.264 cm) at last fret
Neck Wood
Maple
Pickguard
3 ply - White/Black/White
Pickups
Vintage style alnico humbucking pickup with long alnico 5 magnets and wound with original single poly-nylon wire.
Scale Length
34" (86.4 cm)
Strings
45w-65w-80w-100w (Super Slinky Bass #2834)
Truss Rod
Bullet truss rod adjustment at headstock
Tuning Machines
Schaller Bass
Additional Info
Nitrocellulose Lacquer, or simply “Nitro,” is a coveted paint finish in the guitar world due to its beautiful aging qualities, its effect on the tone of the instrument, and its period-correct properties for the golden age of guitars. In many ways, Nitro is a more organic substance than modern Polyester and Urethane paints, and the lacquer drying process results in a thinner coating. For these reasons, it is therefore believed by the vintage guitar community that the inherent resonance of the wood is allowed to shine through best with Nitro. The distinct properties of this finish are important to understand as a Nitro instrument owner for maintenance and care purposes.
Every material used on a guitar will expand and contract with temperature and humidity fluctuations, but the wood will have the most drastic rate of movement. When the change in temperature happens quickly, the Nitro paint can crack or “check” because it will not expand or contract as quickly as the wood. Over time wood loses its moisture and shrinks, which can also cause the Nitro to sink into the wood grain or glue seams.
Similar to every piece of wood, every Nitrocellulose Lacquer paint job has its own unique characteristics. The environment in which these instruments live and the attention by the owner will determine how they age.
Chemical reactions will occur if the Nitro is brought in contact with certain Silicone, Vinyl, Plastic, or Rubber products. Be very careful to use the correct type of wall hangers, guitar stands, and guitar polishes to avoid degradation of the finish. Nitro disclaimers will usually be attached to guitar products for this very reason.
